[Multi-function dial is enhanced]
– A Multi-function dial now works as a memory channel selector in the Memory mode.
– A Multi-function Menus Customization function is added.
– A function indicator for the Multi-function dial is added.

[Other changes]
– A Front Key Customization function that can change the function of [VOX/BK-IN], [AUTOTUNE], [△], and [▽] is added.
– A MIC Key Customization function that can change the function of [UP] and [DOWN] is added.
– The Band Stacking Register window is added.
– While operating in the Data mode, the receive tone control is deactivated.
– The default setting of the CI-V USB Port is changed to “Unlink from [REMOTE].”

Refer to INFORMATION IC-7300 Version 1.40 for details.

The Scroll mode for the RS-BA1 Version 2 software will be added to Version 2.30.

• ・Thoroughly read Section 8. USING AN SD CARD and Section 15. UPDATING THE FIRMWARE of the FULL MANUAL and follow the instructions displayed on the IC-7300 LCD screen.
• ・This update initializes the transceiver’s settings when updating from a firmware earlier than version 1.40. Save your current settings before updating the firmware, and then write it back to keep the previous setting on the updated firmware.
• ・The firmware will be updated to the following versions.
•     Main CPU: 1.40
•     DSP Program: 1.07
•     DSP Data: 1.00
•     FPGA: 1.13